View HD74HC113_166521.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HD74HC113
Dual J-K Flip-Flops (with Preset)
Description
This flip-flop is edge sensitive to the clock input and change state on the negative going transition of the clock pulse. Each one has independent J, K, clock, and preset inputs and Q and Q inputs. Preset is independent of the clock and accomplished by a low level on the input.
Features
* * * * * High Speed Operation: tpd (Clock to Q) = 18 ns typ (CL = 50 pF) High Output Current: Fanout of 10 LSTTL Loads Wide Operating Voltage: VCC = 2 to 6 V Low Input Current: 1 A max Low Quiescent Supply Current: ICC (static) = 2 A max (Ta = 25C)
Function Table
Inputs Preset L H H H H H H H H L Clock X J X L L H H X X X K X L H L H X X X Output Q H No change L H Toggle No change No change No change H L Q L
HD74HC113
Pin Arrangement
1CK 1K 1J 1PR 1Q 1Q GND
1 2 3 4 5 Q 6 7 (Top view) CK PR Q J K
14 VCC 13 2CK 12 2K 11 2J Q K CK PR Q 9 8 2Q 2Q J 10 2PR
Logic Diagram (1/2)
CLR J K # CK CK # CK CK CK CK Q Q
#
CK
#
CK
# CK
CK
CK
2
HD74HC113
DC Characteristics
Ta = 25C Item Input voltage Symbol VIH Ta = -40 to +85C Max -- -- -- 0.5 1.35 1.8 -- -- -- -- -- 0.1 0.1 0.1 0.33 0.33 1.0 20 A A I OL = 4 mA I OL = 5.2 mA Vin = VCC or GND Vin = VCC or GND, Iout = 0 A V I OH = -4 mA I OH = -5.2 mA Vin = VIH or VIL I OL = 20 A V Vin = VIH or VIL I OH = -20 A V Unit V Test Conditions
VCC (V) Min Typ Max Min 2.0 4.5 6.0 1.5 -- 3.15 -- 4.2 -- -- -- -- -- -- -- -- -- -- 0.5 1.5 3.15 4.2 --
VIL
2.0 4.5 6.0
1.35 -- 1.8 -- 1.9 4.4 5.9 4.13 5.63 -- -- --
Output voltage
VOH
2.0 4.5 6.0 4.5 6.0
1.9 2.0 -- 4.4 4.5 -- 5.9 6.0 -- 4.18 -- 5.68 -- -- -- -- -- -- -- -- -- --
VOL
2.0 4.5 6.0 4.5 6.0
0.0 0.1 0.0 0.1 0.0 0.1 -- -- -- --
0.26 -- 0.26 -- 0.1 -- 2.0 --
Input current Quiescent supply current
Iin I CC
6.0 6.0
3
HD74HC113
AC Characteristics (CL = 50 pF, Input tr = tf = 6 ns)
Ta = 25C Item Maximum clock frequency Symbol f max Ta = -40 to +85C Max 5 24 28 190 38 33 175 35 30 -- -- -- -- -- -- -- -- -- -- -- -- 95 19 16 10 pF ns ns Preset to Clock ns Clock to J or K ns J or K to Clock ns Clock, Preset Preset to Q or Q ns Clock to Q or Q Unit MHz Test Conditions
VCC (V) Min Typ Max Min 2.0 4.5 6.0 -- -- -- -- -- -- -- -- -- 80 16 14 -- -- -- -- 18 -- -- 17 -- -- 8 -- 6 30 35 -- -- --
Propagation delay t PLH time t PHL
2.0 4.5 6.0 2.0 4.5 6.0
150 -- 30 26 -- --
140 -- 28 24 -- -- -- -- -- -- -- -- -- -- -- -- 75 15 13 10 -- -- 100 20 17 125 25 21 5 5 5 125 25 21 -- -- -- --
Pulse width
tw
2.0 4.5 6.0
Setup time
t su
2.0 4.5 6.0
100 -- 20 17 5 5 5 4 -- -- -2 --
Hold time
th
2.0 4.5 6.0
Removal time
t rem
2.0 4.5 6.0
100 -- 20 17 -- -- -- -- -2 -- -- 5 -- 5
Output rise/fall time
t TLH t THL
2.0 4.5 6.0
Input capacitance
Cin
--
4
Unit: mm
19.20 20.32 Max 14 8 6.30 7.40 Max 1
2.39 Max
1.30
7 7.62
0.51 Min
2.54 Min 5.06 Max
2.54 0.25
0.48 0.10
0.25 - 0.05 0 - 15
+ 0.10
Hitachi Code JEDEC EIAJ Weight (reference value)
DP-14 Conforms Conforms 0.97 g
Unit: mm
10.06 10.5 Max 14 8 5.5 1 7 *0.22 0.05 0.20 0.04 2.20 Max 7.80 - 0.30 1.15 0 - 8 0.70 0.20
+ 0.20
1.42 Max
1.27 *0.42 0.08 0.40 0.06
0.12 M
Hitachi Code JEDEC EIAJ Weight (reference value) FP-14DA -- Conforms 0.23 g
*Dimension including the plating thickness Base material dimension
0.10 0.10 0.15
Unit: mm
8.65 9.05 Max 14 8 3.95 1 1.75 Max 7
*0.20 0.05
6.10 - 0.30 1.08
+ 0.10
0.635 Max
0 - 8
0.11 0.14 + 0.04 -
1.27 *0.40 0.06
0.67 0.60 + 0.20 -
0.15 0.25 M
Hitachi Code JEDEC EIAJ Weight (reference value) FP-14DN Conforms Conforms 0.13 g
*Pd plating
Cautions
1. Hitachi neither warrants nor grants licenses of any rights of Hitachi's or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party's rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi's sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products.
Hitachi, Ltd.
Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109
URL
NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm For further information write to:
Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 778322 Hitachi Asia Pte. Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: <886> (2) 2718-3666 Fax: <886> (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: <852> (2) 735 9218 Fax: <852> (2) 730 0281 Telex: 40815 HITEC HX
Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan.

▲Up To Search▲

Price & Availability of HD74HC113

	To Download HD74HC113 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .